An earthquake retrofit is the set of structural upgrades that ties a house to its foundation and braces its weakest walls, so the building stays standing and livable when the ground moves. Paired with simple work inside the house, it turns the most dangerous part of an earthquake, the building itself, into a shelter you can count on.

Most earthquake injuries and losses come from what a house does, not from the ground. Walls fold, water heaters tip over, gas lines snap and bookcases land on beds. Whether you own a 1950s bungalow or rent a third-floor apartment, you have real work within reach. Some of it takes a licensed contractor and a permit. Much of it takes a drill, a few straps and one weekend.

Start by walking to your water heater and looking for two metal straps around the tank. If they are missing, that is your first purchase and your first afternoon of work.

How a House Fails in an Earthquake

Learn the weak points of your house and you will know exactly what to fix first. Each weak point has a matching repair, and the fixes follow right after, from the contractor's work down to the straps you can set yourself.

Wood-frame houses have a good reputation in earthquakes, and it is earned. Wood bends where brick cracks. The trouble sits at the connections: where the house meets the foundation, and where a short wall carries the whole house above it.

Sliding: The Unbolted Sill Plate

The sill plate is the wooden board that sits on top of the concrete foundation. The walls of the house are built on it. In many older homes, the sill plate simply rests on the concrete, held by its own weight and a few nails. Strong shaking pushes the house sideways, and it slides right off. A house that leaves its foundation usually breaks its gas, water and sewer lines on the way. Lifting it back into place can cost tens of thousands of dollars.

Folding: Unbraced Cripple Walls

A cripple wall is the short wood wall between the foundation and the first floor of a raised house. It creates the crawlspace under the floor. In older homes, these walls often have nothing on them but siding. When the ground moves, the studs lean over together, like a row of books tipping on a shelf. The house drops two or three feet onto the ground, and the damage above is often severe.

Collapse: Soft Stories Over Garages

A soft story is a ground floor with large openings and few solid walls. A garage door is the classic example. Rooms built over a garage, and apartment buildings with parking tucked underneath, both fit the pattern. The open floor cannot resist sideways force, so it leans and can collapse under the weight of the floors above.

The 2018 Norwegian film The Quake shows the same sideways failure at city scale, as an earthquake strikes Oslo and a family is caught inside a high-rise when the floors start to give way.

Crumbling: Brick and Chimneys

Unreinforced masonry is brick or block built without steel bars inside. The mortar holds it together in calm weather, but shaking pulls the walls apart and peels them away from the floors. Brick chimneys fail the same way. They often snap at the roofline and fall through the roof or into the yard.

The film Aftershock retells the 1976 Tangshan earthquake in China, where a city built largely of brick came down in seconds. It follows one family through the collapse and the decades of rebuilding that came after.

Homes Most at Risk

Raised wood-frame homes built before about 1980 top the list, because many were built without bolts or cripple wall bracing. Houses with living space over a garage come next. Brick buildings and any home with a tall brick chimney round out the group.

If you own a raised house from that era, put the structural work on your list. If you live in a newer house on a concrete slab, your foundation is likely bolted, and your biggest wins are the chimney and the contents. If you rent, the building belongs to the owner, and everything inside belongs to you.

Building for the hazard works. In November 2018, a magnitude 7.1 earthquake shook Anchorage hard and killed no one, because the city had spent 54 years building for it.

No items found.

What an Earthquake Retrofit Is and What It Costs

Get the structure fixed and your house stays on its foundation and stays livable after the shaking stops. Each repair below matches one of the weak points, with plain steps and honest cost ranges, followed by how grants, contractors and permits work.

Foundation Bolting

Bolting ties the sill plate to the concrete. A crew enters the crawlspace and drills down through the sill plate into the foundation. They set anchor bolts, usually every four to six feet, and fit each one with a large square steel washer. Where the crawlspace is too tight to drill from above, they use steel foundation plates that fasten to the side of the sill plate and the side of the concrete. The result is a house that moves with its foundation instead of sliding off it.

Cripple Wall Bracing

Bracing turns a flimsy cripple wall into a shear wall, a wall that resists sideways force. The crew nails structural plywood to the inside face of the cripple wall studs, following a tight nailing pattern. They add blocking where needed and cut vent holes so the crawlspace stays dry. Bolting and bracing are almost always done together, because each one needs the other to work.

Soft Story Strengthening

A soft story needs an engineer's design. The usual fix is a steel moment frame, a rigid steel frame set around the garage door opening, or new plywood shear walls on either side of it. Both often need new concrete footings. You keep your garage door, and the floor above gets a solid base.

Chimney Repair

A contractor can brace a brick chimney to the roof framing, or remove the brick above the roofline and replace it with a lightweight metal flue. The second option takes the falling hazard away entirely.

What It Costs

Prices vary with crawlspace height, access, region and the size of the house. Use these as ranges, then get real bids.

  • Bolting and bracing: A typical raised house runs roughly $3,000 to $7,000, and bolting alone often costs less.
  • Soft story over a garage: A house usually runs roughly $10,000 to $40,000, because engineering and steel add cost.
  • Chimney: Bracing or replacing the top of a chimney often runs a few thousand dollars to over $10,000.
  • Brick buildings: Unreinforced masonry needs a structural engineer, and costs climb well above the other ranges.

Grants That Lower the Bill

A tight budget does not take you out of the running. In California, the Earthquake Brace + Bolt program offers grants of up to $3,000 toward bolting and bracing in eligible zip codes. Income-eligible homeowners can qualify for extra help that may cover most or all of the cost. Registration opens in set windows, and spots can be limited, so mark the dates and sign up early. Outside California, check your state emergency management office and your city building department. Some cities run their own soft-story programs, and some states offer grants when funding is available.

Choosing a Contractor and Getting a Permit

Hire a licensed contractor, and check the license with your state licensing board before you sign. Ask how many retrofits the company has done and whether it builds to a standard retrofit plan, such as the FEMA P-1100 plans for cripple walls. Get two or three bids so you can compare scope as well as price. Grant programs often require a contractor from their trained list, so check that list first.

Insist on a building permit. The permit brings a city inspection, and the inspection gives you a record that the earthquake retrofit was done right. That record helps at resale and can earn a discount on earthquake insurance. Before the inspector arrives, clear a path to the crawlspace access so the visit goes quickly.

No items found.

Securing What Is Inside the House

Lock down the contents of your home and you remove the most common sources of earthquake injury. Most of this work takes a drill, a stud finder and a weekend. The fixes run room by room and finish at the gas meter.

Preppers often start with a kit and a food stockpile. The house that holds them deserves the same attention, and these fixes protect both.

Water Heater: Tipping Tanks

Strap the water heater with two heavy-gauge metal straps. Place one in the upper third of the tank and one in the lower third, keeping the lower strap at least four inches above the controls. Screw each strap into wall studs with lag screws. Then check the gas and water lines. Flexible connectors bend with the tank instead of snapping.

A strapped tank stays upright, so the gas line stays whole. It also keeps 30 to 80 gallons of clean water you can drain for drinking if the city supply stops. That makes one strap job part of your water preparedness too.

Living Room: Falling Furniture

  • Anchor tall furniture: Strap bookcases, dressers, hutches and cabinets to wall studs with furniture straps or L-brackets so they stay against the wall.
  • Secure the TV: Mount a flat-screen TV to the wall, or strap it to its stand and the stand to the wall, so it stays put.
  • Hang art safely: Use closed hooks or wire anchored to studs for heavy frames and mirrors so they cannot hop off the nail.
  • Hold small items: Set vases and keepsakes on museum putty so they stay on the shelf.

Kitchen: Flying Dishes

Fit cabinet doors with positive-catch latches, the kind that hold until you press or lift them. Childproof latches work too. Move heavy pots and glass dishes to lower shelves, and keep the lightest things up high. Add a lip or a bungee cord across the front of open pantry shelves. Your food storage stays on the shelf instead of on the floor in broken jars.

Bedrooms: Heavy Things Overhead

Take heavy frames, mirrors and shelves off the wall above every bed. Move beds away from large windows where you can. Keep a pair of sturdy shoes and a flashlight under each bed, because broken glass is common after strong shaking. Store heavy items in the closet on low shelves.

Garage and Storage: Toppling Shelves

Anchor freestanding shelving units to the wall. Store paint, cleaners and chemicals on the lowest shelves so spills stay small and away from each other.

Gas Leaks: The Shutoff Valve

Find your gas meter and the valve on the pipe just before it. The valve has a flat tab. A quarter turn with an adjustable wrench sets the tab crosswise to the pipe and shuts off the gas. Hang or tie a wrench right beside the meter so it is there when you need it.

Turn the gas off only if you smell gas, hear hissing or see damage. Once it is off, only the gas utility should turn it back on, and after a large quake that can take days. Plan a way to cook and stay warm without gas for at least a three day stretch. If you want the job done for you, a licensed plumber can install an automatic seismic shutoff valve under a permit.

Renters: The Inside Is Yours

Renting limits the structural work, and it puts your full effort where most injuries happen. Furniture straps leave small screw holes that patch easily at move-out. Museum putty and cabinet latches leave no marks at all. Ask your landlord to strap the water heater. In California, state law requires it. A smaller space also means fewer pieces to anchor, so you can finish the whole home in a single afternoon.

No items found.

Insurance and Your First Three Steps

Settle the money question and you will know how you would rebuild after a damaging quake. The answer sets up three steps to start this week.

Earthquake Insurance

Many people assume their homeowners policy covers earthquakes. It often covers fire after an earthquake, which matters. But standard homeowners policies exclude damage from the shaking itself.

Earthquake insurance is a separate policy or an add-on. It usually covers three things, each with its own limit: the house, your belongings and extra living costs while you live somewhere else. The deductible is high, often 10 to 25 percent of the dwelling coverage. On a $400,000 policy with a 15 percent deductible, you pay the first $60,000 of repairs yourself.

If much of your savings is tied up in the house, coverage can protect you from a loss you could not rebuild from. If your home value is low or your savings are deep, you may choose to cover the risk yourself. Renters can buy earthquake coverage for belongings and living costs, often for a small yearly cost. Some insurers lower premiums for homes with a permitted earthquake retrofit, so ask before you buy.

Your First Three Steps

First, spend this weekend inside the house. Strap the water heater, anchor the tallest furniture in each bedroom and hang a wrench by the gas meter.

Second, learn your building. Look up the year it was built, then check the crawlspace with a flashlight. Look for bolt heads with square washers every few feet along the sill plate, and plywood on the short cripple walls. If you rent, ask the landlord what work has been done.

Third, if your house needs an earthquake retrofit, check your state for grant programs and their registration dates, then collect two or three bids. Decide on insurance once you know what the house needs.

For the full household plan, including water, food and what to do during the shaking, see how to prepare for an earthquake.

No items found.